Challenge meets versatility.
The J850 Prime allows you to 3D print full color models in 20% of the time it takes to produce traditional models. This leads to speedier design decisions helping you get to market faster by reducing the number of design iterations and development costs. The J850 Prime can produce over 600,000 PANTONE® validated color combinations, print seven resins simultaneously and provide multi-material capabilities that bring your most imaginative ideas to life.
FabriX Innovation Kit: An easy-to-use, comprehensive, and repeatable solution for 3D printing on fabric and flexible substrates. Extend the ultra-realistic capabilities of the J850 Prime , explore new possibilities and create innovative and stylish design prototypes.
|Build size||490 x 390 x 200 mm|
|Layer Thickness||Horizontal build layers down to 14 microns. 55 microns (0.002 in.) in Super High Speed mode|
|Model Materials||VeroUltra™ opaque materials in black and white, Vero™ family of materials including neutral shades and vibrant VeroVivid™Cyan, VeroVivid™Magenta and VeroVivid™Yellow colors, Agilus30™ flexible material, Transparent VeroClear™ and VeroUltraClear, Digital ABS Plus ivory|
|Digital Model Materials||Unlimited number of composite materials including:
• Over 600,000 colors with VeroUltra
• Rubber-like materials in a variety of Shore A values
• Translucent color tints
|Support Material||SUP705™ (water jet removable), SUP706B™ (soluble)|
|Workstation Compatibility||Windows 10|
|Network Connectivity||LAN – TCP/IP|
|System Size and Weight||1400 x 1260 x 1100 mm, 430 kg|
|Operating Conditions||Temperature 18 – 25 °C, relative humidity 30 – 70% (non-condensing)|
|Power Requirements||100 – 120 VAC, 50 – 60 Hz, 13.5 A, 1 phase / 220 – 240 VAC, 50 – 60 Hz, 7 A, 1 phase|
|Regulatory Compliance||CE, FCC, EAC, RCM, R-NZ|
|Build Modes||High Quality: up to 7 base resins, 14-micron resolution
High Mix: up to 7 base resins, 27-micron resolution
High Speed: up to 3 base resins, 27-micron resolution
Super High Speed: 1 base resin, 55 micron resolution
|Accuracy||Typical deviation from STL dimensions, for models printed with rigid materials, based on size: under 100 mm – ±100μ, above 100 mm – ±200μ or ± 0.06% of part length, whichever is greater.|