The Stratasys F170 & F370 3D Printers are simple to use, yet powerful for busy classrooms and demanding business environments alike because of their new user interface, remote print monitoring, built-in camera, auto calibration, an improved software experience with GrabCAD Print, and easy material changeover.

Build Envelope254 x 254 x 254 mm355 x 254 x 355 mm
Material Delivery2 bays: 1 model / 1 support4 bays: 2 model / 2 support
Material OptionsPLA2, ABS-M30, ABS-CF10, ASA, TPU 92A, QSR Support materialPLA2, ABS-ESD7, ABS-M30, ABS-CF10, ASA, Diran 410MF072, FDM TPU 92A, PC-ABS, QSR Support materiaL
Layer Thickness0.330 mm, 0.254 mm, 0.178 mm, 0.127 mm
System Size and Weight1,626 x 864 x 711 mm, 227 kg with consumables
Noise Specification46 dB maximum during build, 35 dB when idle
AccuracyWithin an accuracy of +/- .200 mm, or +/- .002 mm/mm, whichever is greater.
Network ConnectivityWired: TCP/IP protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector Wireless-ready: IEEE 802.11n, g, or b. Authentication: WPA2-PSK, 802.1x EAP Encryption: CCMP, TKIP
SoftwareGrabCAD Print™, GrabCAD Print Pro™Insight™, GrabCAD Print™, GrabCAD Print Pro™
System RequirementsWindows 7, 8, 8.1 and 10 (64bit) with a minimum of 4GB RAM (8GB or more recommended)
Operating EnvironmentOperating: Temperature: 15 – 30 ºC, Humidity: 30 – 70% RH Storage: Temperature: 0 – 35 ºC, Humidity: 20 – 90% RH
Power Requirements100–132V/15A or 200 – 240V/7A. 50/60 Hz100–132V/15A or 200 – 240V/7A. 50/60 Hz
Regulatory ComplianceCE (low-voltage and EMC directive), FCC, EAC, cTUVus, FCC, KC, RoHs, WEEE, Reach, RCM