Benefits

Origin Two brings the benefits of additive manufacturing for high-mix, low-volume production to high-accuracy applications.

  • Ideal for short production runs, accommodating both tight tolerances and large, complex parts
  • Open material system: select the most suitable high-performance material from the validated list, with pre-tested and optimized profile
  • Full flexibility: use your own material and print settings with the Open Material License
  • Reduce supply chain risks by bringing production in-house, especially for applications requiring accuracy, repeatability, and injection-molding quality
  • Enhance quality in high-precision part production by minimizing reliance on third parties and consolidating multi-component parts into single SKU 

 

Origin Two – P3 Brochure

Origin Two – P3 Specs

Build Envelope192 x 108 x 370 mm
Maximum length on the diagonal — 220 mm
Achievable AccuracyXY and Z tolerance of up to +/-50 µm for validated applications and +/- 100 µm in general
Repeatability>95% of prints are within +/-50* µm across printers and build heads*
*Between 25 µm – 200 µm layers with OpenAM™
Light Engine5K projector with 38.5 µm pixel size and tight 2.5 standard deviation projector uniformity
Surface FinishSurface roughness of up to 2µm Ra*
MaterialsPhotocurable materials, single component:
• Validated materials developed by Stratasys and its material partners
• Any material, via the OpenAM™ License
• Changeover can be completed in under 10 min.
• Long shelf lives and re-usable
• Three starter materials included
Minimum Feature SizeMinimum Feature Size Material and design dependent
Wavelength385nm
Resolution 4K light engine
Pre-Print Software Stratasys GrabCAD Print™ or optional 3rd party solutions
Touchscreen printer user interface
Regulatory Compliance CE, UKCA, FCC, RCM, NRTL [pending]
System Size and WeightW: 50 cm, D: 52 cm, H: 117 cm, W: 86 kg
Power Requirements100-120 VAC, 50/60Hz, 7.1A, 1 Ph or
200-240 VAC, 50/60 Hz, 3.5 A, 1 Ph
Network ConnectivityEthernet / Offline connectivity available with Origin Two Local
Ventilation Ventilation Refer to photopolymer material MSDS or contact Stratasys rep for guidelines.
Operating ConditionsOperating temperature in the range of 18 °C to 25°C with humidity range of 30% to 70%
Network SecurityIndustry-standard end-to-end encryption
Gas Exhaust (optional) Facility exhaust
Air Extraction Add-OnProAero
Post-processingOrigin Cure™ - The published printer specifications for accuracy, tolerances, injection-molding like surface
finish require use of Origin Cure post-processing unit.
AccessoriesIncluding Tray Pour Jig; Lid; Pour Spout; Stand; Tray; Part Removal Jig; Scraper Jig, Printer stand, BuildHead Removal Jig (“No-drip”)
Resin Tray Capacity 2L
Resin Storage TemperatureTypically 15°C to 30°C
Transportation and Storage
Temperature
Typically -20°C to 50°C
Printer AuthenticationCryptographically secure handshake
Network SecurityNetwork Security Industry-standard end-to-end encryption