Why Flexible 70A Resin?
- 🦾 Print Rubber Without a TPU Printer Shore 70A elasticity – the same hardness as a car tire – delivered through your LCD, SLA, or DLP printer. No filament machine needed.
- ↩️ Bend It, Twist It, Compress It – It Comes Back Withstands repeated flexing and compression without permanent deformation. Built for moving parts, wearables, and anything that takes a beating.
- 🔒 Tear-Resistant Even in Thin Sections Enhanced tear resistance – means fine details and thin walls hold up in real-world use – not just on the print bed.
- 🖐️ Clean, Dry, Non-Sticky Surface – Right Off the Printer No tacky residue, no dust attraction. Parts feel finished and professional straight from the wash-and-cure station.
- 💨 Low Odor, Low Viscosity – Better Flow, Better Workspace Improved resin flow reduces print failures on fine features, while low odor keeps your workspace comfortable during long print sessions.
- 🎯 Built For – Handles, grips & shoe molds · Seals, gaskets & masks · Cushioning, damping & shock absorption.
Print Settings:
Exposure time
Layer Height: 0.05 mm
Bottom Layer Count: 5 – 10
Bottom Exposure Time
Monochrome LCD screen: 25-100s
RGB LCD screen: 30-120s
Exposure Time
Monochrome LCD screen: 5-10s
RGB LCD screen: 8-30s
Lifting Distance
7-inch printer: 6-10 mm
Printers larger than 7-inch: ≥ 8 mm
Printers larger than 10-inch: ≥ 10 mm
Lifting Speed: 60-90 mm/min
Retract Speed: 60-90 mm/min
* The settings displayed above are intended as guidance to help you find your optimal print settings. Each desktop 3D printer has its own characteristics and requires fine-tuning and optimization of these settings to achieve the best printing results.
Specifications:
- Net Weight: 1 kg (35.27 oz)
- Container Weight: 205 ±7 g
- Tensile Strength: 4 MPa
- Elongation at Break: 140%
- Density: 1.19 g/cm3 at 23 ℃
- Viscosity: ≤2000 mPa.s at 25 ℃
- Shore D Hardness: 70A
*All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature. Certain specifications may be subject to change without prior notice.
